Skip to content
Network & Connectivity

Ethernet & Private Line

Point-to-point and multipoint Carrier Ethernet, DWDM wavelengths and data-centre interconnect from 1G to 100G - deterministic latency, protected paths and metro, national and international reach for the links that cannot fail.

Ethernet & Private Line - Dollu
  • 1G–100G

    Per-circuit bandwidth

  • < 50 ms

    Protection switching

  • 40+

    On-net PoPs and data centres

Overview

What is Ethernet & Private Line?

Dollu Ethernet & Private Line services give you dedicated Layer-2 or optical capacity between two or more locations, with no routing, no shared queues and no dependence on the public internet. Whether it is a 10G Ethernet link between your primary and secondary data centre, a 100G wavelength between two cloud regions or a metro E-LAN joining a campus of buildings, the circuit is engineered end to end with a fixed path, deterministic latency and an SLA measured in milliseconds and minutes rather than best-effort promises.

Services are aligned to the MEF Carrier Ethernet model. E-Line delivers point-to-point Ethernet Private Line or Ethernet Virtual Private Line with committed information rates from 10 Mbps to 100 Gbps; E-LAN and E-Tree provide multipoint any-to-any or hub-and-spoke Layer-2 domains across sites; and wavelength services hand you a transparent 10G or 100G channel on our DWDM network for protocols and encryption of your own choosing. Every service is turned up with RFC 2544 or Y.1564 testing and monitored with Y.1731 performance OAM.

Reach is metro, national and international. We are on-net in more than 40 PoPs and major data-centre campuses across Europe, North America, the Middle East and Asia-Pacific, including our own facilities in London, Frankfurt, Amsterdam, Ashburn, Mumbai and Singapore, and we extend to off-net buildings through fibre and licensed microwave from domestic partners. International routes use diverse subsea capacity so a London–Mumbai or Singapore–Ashburn circuit can be protected across physically separate cable systems.

Data-centre interconnect is where these services see the heaviest use. Storage replication, database clustering, virtual-machine mobility and backup all need low, stable latency and clean Layer-2 transparency, and DCI circuits from Dollu are delivered with protected or diverse-path options, jumbo frames, optional MACsec or optical-layer encryption and cross-connects into the major colocation operators, ordered and supported through the same portal and 24×7 NOC as the rest of your Dollu estate.

Why Dollu

Why choose Dollu for ethernet private line.

The advantages of buying from a carrier that owns its network, interconnects and operations - rather than a reseller.

  • Deterministic, not best-effort

    A fixed engineered path means the latency you measure at turn-up is the latency you get every day, which is what synchronous replication, trading systems and live media need.

  • Layer-2 transparency

    Your VLANs, MTU, routing protocols and encryption pass through untouched, so the circuit looks like a very long patch lead between your own switches.

  • Protection built in

    Protected services switch to a pre-provisioned alternate path in under 50 ms; diverse services give you two independent circuits for your own active-active design.

  • Scale in place

    Start at 1G on a 10G port and step up to line rate with a configuration change; wavelengths grow from 10G to 100G on the same fibre pair.

  • Reach where your data lives

    On-net in the data centres your workloads sit in, with cross-connects, meet-me-room presence and international routes on diverse subsea systems.

Capabilities

Capabilities in detail.

Everything included with Ethernet & Private Line - the platform features, options and controls you get from day one.

  1. 01

    E-Line point-to-point

    Ethernet Private Line (port-based) and Ethernet Virtual Private Line (VLAN-based) between two UNIs, 10 Mbps to 100 Gbps, with committed and excess information rates and colour-aware policing.

  2. 02

    E-LAN and E-Tree multipoint

    Any-to-any Layer-2 domains across three or more sites, or rooted hub-and-spoke trees for headquarters-to-branch designs, with MAC learning limits and per-EVC bandwidth profiles.

  3. 03

    Wavelength services

    Transparent 10G, 100G and 400G-ready DWDM channels for Ethernet, Fibre Channel or OTN payloads, unprotected or 1+1 optically protected, with optional Layer-1 AES-256 encryption.

  4. 04

    Data-centre interconnect

    Pre-built DCI between major colocation campuses and Dollu PoPs, cross-connects to your cage, jumbo frames, low-latency routes and bundles for storage replication and cluster interconnect.

  5. 05

    Class of service

    Up to three CoS per EVC mapped from 802.1p or DSCP, with per-class frame delay, delay variation and loss objectives for carrying voice, storage and bulk traffic on the same circuit.

  6. 06

    Protection and diversity

    G.8032 ring protection and 1+1 path protection with sub-50 ms switchover, physically diverse routes, dual building entries where available and termination on separate PoPs.

  7. 07

    Access options

    Dollu and partner fibre in metro areas, national Ethernet from domestic operators, licensed microwave for rapid or diverse delivery, and in-building cross-connects at on-net data centres.

  8. 08

    Testing and assurance

    RFC 2544 and Y.1564 service activation testing, Y.1731 and 802.1ag OAM for continuous delay, jitter and loss measurement, portal reporting and proactive NOC alerting on threshold breach.

  9. 09

    International reach

    Protected international circuits across diverse subsea systems between Europe, the Americas, the Middle East, India and Asia-Pacific, with a single SLA and one point of contact end to end.

How it works

How it works.

From first conversation to live traffic - a tracked, engineer-led onboarding with a named owner at every step.

  1. Step 01

    Scope

    Tell us the A and B ends, bandwidth, latency target and protection requirement. We confirm on-net status, propose routes and diversity options and quote lead times.

  2. Step 02

    Build

    Fibre, cross-connects and optics are ordered and installed; the circuit is provisioned on our Ethernet or DWDM platform to the agreed path and protection scheme.

  3. Step 03

    Test

    RFC 2544 or Y.1564 activation tests confirm throughput, latency, jitter and loss against the SLA, and results are shared in the handover pack.

  4. Step 04

    Operate

    Y.1731 OAM monitors the circuit continuously; the 24×7 NOC handles incidents proactively and your account manager manages upgrades and renewals.

Compare

MPLS, DIA, broadband or 4G/5G.

No single transport suits every site. Most Dollu WAN designs mix them - an SD-WAN overlay stitches the underlays together and steers voice and critical apps onto the best path.

WAN transports compared on SLA, quality of service, cost, lead time and typical fit.
DimensionMPLS / IP-VPNDedicated internet accessBusiness broadband4G / 5G
SLAHighest - end-to-end latency, jitter, packet-loss and availability targetsHigh - availability and repair time on the circuit; the wider internet path is best effortBest effort; consumer-grade repair timesBest effort; dependent on radio coverage and cell load
QoSEnd-to-end classes of service across the Dollu coreDedicated, symmetrical bandwidth; QoS to the network edge onlyContended and asymmetric; no QoS guaranteesShared spectrum; private 5G adds on-site QoS and slicing
Cost positionHighest per MbpsMidLowestLow - per SIM plus data
Lead timeLongest - new fibre and cross-connects; weeks to monthsWeeks; faster where the building is already litDays to weeksDays - hardware ships and activates on power-up
Best forVoice-critical sites, regulated data, hub-and-spoke WANsHead offices, data centres, cloud on-ramps, SIP trunksSmall sites, backup paths, SD-WAN underlayRapid deployment, temporary sites, resilience overlay, IoT and fleets
Use cases

Who uses this and why.

Typical deployments across carriers, enterprises, platforms and contact centres.

  • Data-centre interconnect and DR

    Synchronous storage replication, database clustering and VM mobility between production and recovery sites over low-latency, protected 10G or 100G circuits.

  • Financial services and trading

    Fixed, low-latency paths between offices, exchanges and colocation sites for market data, order routing and secure interbank connectivity.

  • Media and broadcast contribution

    Uncompressed or lightly compressed video between studios, playout centres and venues on deterministic Ethernet or wavelength services.

  • Carriers and ISPs

    Backhaul, PoP-to-PoP transport and international capacity for operators that need wholesale Ethernet or wavelengths on diverse routes.

  • Hospitals, campuses and universities

    E-LAN services stitching multiple buildings or sites into one Layer-2 domain for imaging, research data and campus applications.

  • Cloud backhaul

    High-capacity private circuits from your data centre to Dollu cloud on-ramp PoPs for AWS, Azure, Google Cloud and Oracle.

Specifications

Technical & commercial specifications.

Key parameters at a glance. Ask us for the full service description and SLA document.

Service typesE-Line (EPL/EVPL), E-LAN, E-Tree, DWDM wavelengths
Bandwidth10 Mbps - 100 Gbps Ethernet; 10G/100G wavelengths, 400G on request
Hand-off1G/10G/100G Ethernet, single-mode fibre; OTU2/OTU4 for waves
Frame sizeJumbo frames up to 9,000 bytes
Class of serviceUp to 3 CoS per EVC (802.1p or DSCP mapped)
ProtectionUnprotected, 1+1 protected (< 50 ms), or physically diverse pair
EncryptionMACsec (AES-256) or optical-layer encryption on request
Availability SLA99.95% unprotected; 99.99% protected; 99.999% diverse pair
AssuranceRFC 2544 / Y.1564 activation; Y.1731 and 802.1ag OAM
Support24×7 NOC; P1 response ≤ 15 min; named account manager
Pricing model

How Connectivity is priced.

Circuits carry a monthly recurring charge set by bandwidth, access type and SLA tier; SD-WAN and managed LAN per site. Every site is quoted individually with a lead time.

We publish the model, not a public rate card - actual rates depend on destination, route class, volume and regulatory cost. See how every Dollu service is priced.

Monthly recurring · per circuit
  • MRC by bandwidth, access type and SLA tier
  • Site-by-site quotes with lead times
  • One-time install charge where applicable, quoted up front
  • 12–36 month terms
  • Multi-country consolidation discounts
Billing
Monthly recurring in advance; install charge on delivery; single invoice across countries
Commitment
12–36 months per circuit
Talk to salesActual rates within one business day.
FAQ

Ethernet Private Line - your questions answered.

The questions customers and carriers ask us most often before they interconnect. If yours is not here, our team answers within one business day.

Still have a question?

Ask our solutions team

Choose Ethernet or a wavelength when you need Layer-2 transparency, very high bandwidth between a small number of sites, or the lowest and most stable latency - data-centre interconnect, replication and trading are typical. Choose MPLS IP-VPN when you have many sites, need any-to-any routing and want the provider to handle QoS and routing for you.

Let’s talk

Price a circuit between your sites.

Send us the two end addresses, bandwidth and protection level and we will return on-net status, route options and pricing within two business days.

Abstract globe with connected network lines